China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS

China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS Featured Image
  • China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS
  • China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS
  • China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS
  • China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our advancement depends over the highly developed devices, excellent talents and continually strengthened technology forces for Mechanical Oil Seal, Pump Spare Part, Elastomer Bellow Mechanical Seal, We aim at Ongoing system innovation, management innovation, elite innovation and market innovation, give full play to the overall advantages, and constantly improve service quality.
China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS Detail:

Replacement of Below Mechanical Seals

Burgmann MG901, John crane Type 1, AES P05U, Flowserve 51, Vulcan A5

Technical Features

  • Unbalanced
  • Single Spring
  • Bi-directional
  • Elastomer Bellows
  • Set screw lock collars available

Designed Features

  • To absorb both breakout and running torque, the seal is designed with a drive band and drive notches that eliminate overstressing of bellows. Slippage is eliminated, protecting the shaft and sleeve from wear and scoring.
  • Automatic adjustment compensates for abnormal shaft-end play, run-out, primary ring wear and equipment tolerances. Uniform spring pressure compensates for axial and radial shaft movement.
  • Special balancing accommodates higher-pressure applications, greater operating speeds and lower wear.
  • Non-clogging, single-coil spring allows for greater dependability than multiple spring designs. Will not run foul due to fluid contact.
  • Low drive torque improves performance and reliability.

Operating Range

Temperature: -40°C to 205°C/-40°F to 400°F (depending on materials used)

Pressure: 1: up to 29 bar g/425 psig 1B: up to 82 bar g/1200 psig
Speed: 20 M/S 4000 FPM
Standard size:12-100mm or 0.5-4.0 inch

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Material

Rotary Face
Carbon graphite resin impregnated
Tungsten carbide
Silicon carbide (RBSIC)
Stationary Seat
Aluminium oxide(Ceramic)
Silicon carbide (RBSIC)
Tungsten carbide 1

Auxiliary Seal 
Nitrile-Butadiene-Rubber (NBR)
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
Spring
Stainless Steel (SUS304, SUS316)
Metal Parts
Stainless Steel (SUS304, SUS316)

Recommended Applications

  • Water and waste water technology
  • Petroleum chemical industry
  • Industrial pumps
  • Process pumps
  • Other Rotating Equipment

product-description1

TYPE W1 dimension data sheet (inches)

product-description2

Product detail pictures:

China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS detail pictures

China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS detail pictures

China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS detail pictures

China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS detail pictures

Related Product Guide:
We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for China High Quality Carbon Face Seal Factory – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS, The product will supply to all over the world, such as: Johannesburg, Rio de Janeiro, Costa rica, because of our company has been persisting in the management idea of "Survival by Quality, Development by Service, Benefit by Reputation" . We fully realize the good credit standing, the high quality products, the reasonable price and the professional services are the reason that the customers choose us to be their long-term business partner.
    • Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Marjorie from Kuwait - 2017.12.09 14:01
    Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Adelaide from Saudi Arabia - 2018.09.21 11:44

    RELATED PRODUCTS