China High Quality Carbon Mechanical Seal Manufacturers – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS Detail:
Replacement of Below Mechanical Seals
Burgmann MG901, John crane Type 1, AES P05U, Flowserve 51, Vulcan A5
Technical Features
- Unbalanced
- Single Spring
- Bi-directional
- Elastomer Bellows
- Set screw lock collars available
Designed Features
- To absorb both breakout and running torque, the seal is designed with a drive band and drive notches that eliminate overstressing of bellows. Slippage is eliminated, protecting the shaft and sleeve from wear and scoring.
- Automatic adjustment compensates for abnormal shaft-end play, run-out, primary ring wear and equipment tolerances. Uniform spring pressure compensates for axial and radial shaft movement.
- Special balancing accommodates higher-pressure applications, greater operating speeds and lower wear.
- Non-clogging, single-coil spring allows for greater dependability than multiple spring designs. Will not run foul due to fluid contact.
- Low drive torque improves performance and reliability.
Operating Range
Temperature: -40°C to 205°C/-40°F to 400°F (depending on materials used)
Pressure: 1: up to 29 bar g/425 psig 1B: up to 82 bar g/1200 psig
Speed: 20 M/S 4000 FPM
Standard size:12-100mm or 0.5-4.0 inch
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials
Combination Material
Rotary Face
Carbon graphite resin impregnated
Tungsten carbide
Silicon carbide (RBSIC)
Stationary Seat
Aluminium oxide(Ceramic)
Silicon carbide (RBSIC)
Tungsten carbide 1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR)
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
Spring
Stainless Steel (SUS304, SUS316)
Metal Parts
Stainless Steel (SUS304, SUS316)
Recommended Applications
- Water and waste water technology
- Petroleum chemical industry
- Industrial pumps
- Process pumps
- Other Rotating Equipment
TYPE W1 dimension data sheet (inches)
Product detail pictures:
Related Product Guide:
We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for China High Quality Carbon Mechanical Seal Manufacturers – Type W1 Elastomer Bellows Shaft Seal For Pump Replaced John Crane Type 1 Mechanical Seals – VICTOR SEALS, The product will supply to all over the world, such as: Greece, Azerbaijan, Nicaragua, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we have better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We are always here working for your demands whenever you need.
By Denise from Amsterdam - 2017.08.18 11:04
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Nick from Albania - 2018.06.05 13:10